Asus TS700-X7/PS4 User Manual Download Page 155

Page: 155 / 200

TS700-X7/PS4

6-33

Chapter 6

6.4

Intel

Rapid Storage Technology enterprise Utility

(Windows)

The Intel

Rapid Storage Technology enterprise utility allows you to create RAID 0,

RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives

that are connected to the Serial ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

1. Turn on the system to windows desktop.
2. Click the

Intel

Rapid Storage Technology enterprise

icon to display the

main menu.

Your storage system is configured for data protection, increased performance

and optimal data storage capacity. You can create additional volumes to further

optimize your storage system.

To enter the Intel

Rapid Storage Technology enterprise utility under Windows

operating system:

You need to manually install the Intel

Rapid Storage Technology enterprise

utility on a Windows

operating system. Please refer to the installation

instructions in Chapter 6.

Summary of Contents for TS700-X7/PS4









































































































































































































Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands

Asus TS700-X7/PS4, User Manual

Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands