Asus TS700-X7/PS4 User Manual Download Page 163

Page: 163 / 200

TS700-X7/PS4

7-3

Chapter 7

To create a RAID driver disk in Windows

environment

1. Start Windows

2. Place the motherboard support DVD into the optical drive.
3. Go to the

Make disk

menu, and then select the type of RAID driver disk you

want to create.

4. Insert a floppy disk into the USB floppy disk drive.

5. Follow succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid computer virus infection.

To create a RAID driver disk in Red Hat

Enterprise Linux server environment

1. Insert a blank formatted high-density floppy disk to the USB floppy disk drive.

2. Type

dd if=XXX.img of=/dev/fd0

to decompress the file into the floppy

disk from the following path in the support DVD:

For LSI MegaRAID Driver

\Drivers\C600 LSI RAID\Driver\makedisk\Linux

3. Eject the floppy disk.

Summary of Contents for TS700-X7/PS4









































































































































































































Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands

Asus TS700-X7/PS4, User Manual

Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands