Asus TS700-X7/PS4 User Manual Download Page 53

Page: 53 / 200

TS700-X7/PS4

3-1

Chapter 3

Installation options

3.1

Preparing the system for rack mounting

• The items required for the optional configurations described in this

chapter are not included in the standard barebone system package. These

items are purchased separately.
• We recommend that you allot at least 1U space above the server

system to ensure optimal thermal performance.

Removing the footpads

Refer to section 2.9.2 Chassis footpads for instructions on removing the

footpads.

Removing the top cover

Unscrew and slide the top cover toward

the rear panel, and then lift it up from

the chassis.

•

Summary of Contents for TS700-X7/PS4









































































































































































































Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands

Asus TS700-X7/PS4, User Manual

Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands