Chapter 2: Hardware setup
2-16
2.6
SATA/SAS hard disk drives
The optional two hard disk drive modules on the front panel, including externally
removable trays for mounting either SATA or SAS hard disk drives, allow you to
access the drive trays by simply opening the the front bezel.
A hot-swap HDD module cage comes with a SATA or SATS backplane. Make
sure of the type of HDD module cage you purchase before buying hard disks.
2.6.1
Hot-swap HDD module
To install the hot-swap HDD module:
1. Examine the chassis and make sure the bay space is free of wires and other
obstructions.
2. Insert the hot-swap HDD module
into the bay.
3. To remove the hot-swap HDD
module, lift up the blue latch (a),
then pull out the hot-swap HDD
module (b).
b
a
