Asus TS500-E5 User Manual Download

Page: 150 / 164

7-8

Chapter 7: Driver installation

2. At the

boot:

, type

linux dd

, then press <Enter>.

4. Right-click the

RAID controller

driver item, then select

Properties

from the

menu.

5. Click the

Driver

tab, then click the

Driver Details

button to display the RAID

controller drivers.

6. Click

when finished.

Red Hat

Enterprise

To install the Intel

ICH9R LSI Logic Embedded SATA RAID controller driver when

installing Red Hat

Enterprise OS:

1. Boot the system from the Red Hat

Installation CD.

When installing a Red Hat 2.4 kernel with a Driver Update Disk (DUD) to a disk

drive attached to a LSI HBA, use the command below at the install prompt:

linux dd updates.

Summary of Contents for TS500-E5





































































































































































Search results

Summary of Contents for TS500-E5

Reviews:

Related manuals for TS500-E5

Brands by name

Popular brands

Asus TS500-E5, User Manual

Search results

Summary of Contents for TS500-E5

Reviews:

Related manuals for TS500-E5

Brands by name

Popular brands