Asus TS500-E5 User Manual Download

Page: 137 / 164

ASUS TS500-E5

6-33

6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then

press <Enter>. The available stripe size values range from 4 KB to 128 KB.

The default stripe size is 128 KB.

A lower stripe size is recommended for server systems. A higher stripe size

is recommended for multimedia computer systems used mainly for audio and

video editing.

7. Highlight the

Capacity

item, enter the desired RAID volume capacity, then

press <Enter>. The default value indicates the maximum allowed capacity.

8. When the

Create Volume

item is highlighted, press <Enter>.

A warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu, or <N> to

go back to the

Create Array

menu.

Summary of Contents for TS500-E5





































































































































































Search results

Summary of Contents for TS500-E5

Reviews:

Related manuals for TS500-E5

Brands by name

Popular brands

Asus TS500-E5, User Manual

Search results

Summary of Contents for TS500-E5

Reviews:

Related manuals for TS500-E5

Brands by name

Popular brands