Asus TS300-E3 User Manual Download

Page: 166 / 204

6-38

Chapter 6: RAID conﬁguration

3. Use the arrow keys to select a RAID set member, then press

<SpaceBar> to mark. An

mark appears after the selected HDD.

4. Follow step 3 to select the other members of the RAID set, then press

<Enter> when ﬁnished.

5. Select

Create new RAID-1

from the RAID-1 Build Option menu, then press

<Enter>. Refer to the options description below.

•

Create a New RAID-1

- The default option. Select this option when

creating a new RAID 1 set.

•

Copy from ( 0) to ( 1)

- Select this option when you want to copy the

source drive contents to a target drive, provided that the source is equal to

or smaller than the target drive.

•

Copy from ( 1) to ( 0)

- Select this option when you want to copy the

source drive contents to a target drive, provided that the source is larger

than the target drive.

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands