Asus TS300-E3 User Manual Download

Page: 159 / 204

ASUS TS300-E3/PA4 & PS4

6-31

6.4

Adaptec SCSISelect(TM) Utility!

(P5MT-S model only)

The Adaptec SCSISelect(TM) Utility allows you to create RAID 0, 1, and 0+1 set(s)

from SCSI hard disk drives connected to the SCSI connector supported by the

Adaptec embedded SCSI controller.
To enter the Adaptec SCSISelect(TM) Utility!:

1. Turn on the system after installing all the SCSI hard disk drives.
2. During POST, the Adaptec SCSI BIOS automatically detects the installed

SCSI hard disk drives and displays any existing RAID set(s). Press <Ctrl>

<A> to enter the utility.

3. The utility auto-detects the available SCSI channels. Select the SCSI

channel, then press <Enter>.

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands