Asus TS300-E3 User Manual Download

Page: 158 / 204

6-30

Chapter 6: RAID conﬁguration

6.2.9

Enabling the WriteCache

You may enable the RAID controllerʼs

WriteCache

option to improve the data

transmission performance.

When you enable WriteCache, you may lose data when a power interruption occurs

while transmitting or exchanging data among the drives.

To enable WriteCache:

1. From the Management Menu, select

Objects

Adapter

, then press <Enter>

to display the adapter properties.

2. Select

WriteCache

, then press <Enter> to turn the option

(enabled).

6.3

Global Array Manager

You may also create a RAID set(s) in Windows

operating environment using the

Global Array Manager (GAM) application. The GAM application is available from

the motherboard support CD.

Refer to the GAM user guide in the motherboard support CD for details.

3. When ﬁnished, press any key to continue.

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands