Asus TS300-E3 User Manual Download

Page: 192 / 204

7-12

Chapter 7: Driver installation

7.2

LAN driver installation

This section provides instructions on how to install the Broadcom

Gigabit LAN

controller drivers.

7.2.1

Windows

2000/2003 Server

To install the Broadcom

Gigabit LAN controller driver on a Windows

2000/2003

Server OS:

1. Restart the computer, then log on with Administrator privileges.
2. Insert the motherboard/system support CD to the optical drive. The CD

automatically displays the Drivers menu if Autorun is enabled in your

computer.

• Windows

automatically detects the LAN controllers and displays a

New

Hardware Found

window. Click

Cancel

to close this window.

• If

Autorun

is NOT enabled in your computer, browse the contents of

the support CD to locate the ﬁle

ASSETUP.EXE

from the BIN folder.

Double-click the

ASSETUP.EXE

to run the CD.

3. Click the

Broadcom Lan Driver

option to begin installation.

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands