Asus TS300-E3 User Manual Download

Page: 153 / 204

ASUS TS300-E3/PA4 & PS4

6-25

6.2.6

Checking the drives for data consistency

You can check and verify the accuracy of data redundancy in the selected logical

drive. The utility can automatically detect and/or detect and correct any differences

in data redundancy depending on the selected option in the

Objects > Adapter

menu.

The Check Consistency command is available only for logical drives included in

a RAID 1 set.

Using the Check Consistency

To check data consistency using the Check Consistency command:

1. From the Management Menu, select Check Consistency, then press <Enter>.

2. The screen displays the available RAID set(s) and prompts you to select the

logical drive to check. Use the arrow keys to select the logical drive from the

Logical Drive

selection, then press <Enter>.

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands