Asus TS300-E3 User Manual Download

Page: 13 / 204

ASUS TS300-E3/PA4 & PS4

1-3

1.2

System speciﬁcations

The ASUS TS300-E3 is a barebone server system featuring the ASUS P5MT

Series motherboard. The server supports an Intel

Pentium

4/Pentium

processor in the 775-land package, and includes the latest technologies through

the chipsets embedded on the motherboard.

(continued on the next page)

Chassis

Pedestal or rackmount 5U with removable front door bezel

and chassis foot stand or roller-wheels.

Motherboard

ASUS P5MT (PA4 model)

ASUS P5MT-S (PS4 model)

ATX compatible form factor: 12 in x 9.6 in

Chipset

Northbridge: Intel

E7230 Memory Controller Hub (MCH)

Southbridge: Intel

ICH7R

I/O Bridge: Intel

6702 PXH

Processor

Intel

Pentium

4/Intel

Pentium

D processor in the 775-land

package with Extended Memory 64-bit Technology (EM64T)

Supports Dual Core technology

Front Side Bus

1066/800/533 MHz

Memory

Dual-channel memory architecture

4 x 240-pin DIMM sockets support ECC/non-ECC unbuffered

667/533 MHz DDR2 memory modules

Supports 256 MB up to 8 GB of system memory

LAN

Dual Broadcom

BCM5721 Gigabit LAN controllers

- PCI Express 1.0a speciﬁcations compliant

Storage

For PA4 model only

Intel

ICH7R Southbridge supports:

- 4 x Serial ATA 3 Gb/s hard disk drives

- RAID 0, RAID 1, RAID 0+1, and RAID 5 (with limited

OS support) conﬁguration

- Intel

Matrix Storage Technology

- LSI Logic Embedded SATA RAID controller (RAID 0,

RAID 1, RAID 10)

For PS4 model only

Adaptec AIC-7901 SCSI controller supports:

- 1 x Ultra 320 SCSI channel with RAID 0, RAID 1, and

RAID 10 conﬁguration

- Zero-Channel RAID

(optional)

Summary of Contents for TS300-E3













































































































































































































Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands

Asus TS300-E3, User Manual

Search results

Summary of Contents for TS300-E3

Reviews:

Related manuals for TS300-E3

Brands by name

Popular brands