Asus TS100-E9-PI4 User Manual Download Page 41

Page: 41 / 140

2-21

ASUS TS100-E9-PI4

2.8

System fan

This section describes how to remove the system fan in the event that you need to install or

remove previously installed or new system components, or when the system fan needs to be

replaced because it was damaged or became defective.
To remove the system fan:

Disconnect the system fan cable from

the REAR_FAN1 connector on the

motherboard.

Remove the system fan.

Remove the four system fan screws at

the rear panel. Keep the screws for later

use.

Hold the system fan with one hand

while removing the system fan screws.

Follow the previous instructions in

reverse order if you want to reinstall

the system fan.

Summary of Contents for TS100-E9-PI4













































































































































Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands

Asus TS100-E9-PI4, User Manual

Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands