Asus TS100-E9-PI4 User Manual Download Page 57

Page: 57 / 140

ASUS TS100-E9-PI4

3-15

14. Chassis intrusion connector (2-pin INTRUSION1)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis

intrusion sensor or switch sends a high-level signal to this connector when a chassis

component is removed or replaced. The signal is then generated as a chassis intrusion

event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

15. System Management Bus (SMBUS) connector (5-1 pin SMBUS1)

This connector controls the system and power management-related tasks. This

connector processes the messages to and from devices rather than tripping the

individual control lines.

Summary of Contents for TS100-E9-PI4













































































































































Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands

Asus TS100-E9-PI4, User Manual

Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands