Asus TS100-E9-PI4 User Manual Download Page 91

Page: 91 / 140

ASUS TS100-E9-PI4

4-33

Software Feature Mask Configuration

RAID0 [Enabled]

Allows you to enable or disable the RAID0 feature.

Configuration options: [Disabled] [Enabled]

RAID1 [Enabled]

Allows you to enable or disable the RAID1 feature.

Configuration options: [Disabled] [Enabled]

RAID10 [Enabled]

Allows you to enable or disable the RAID10 feature.

Configuration options: [Disabled] [Enabled]

RAID5 [Enabled]

Allows you to enable or disable the RAID5 feature.

Configuration options: [Disabled] [Enabled]

Intel Rapid Recovery Technology [Enabled]

Allows you to enable or disable the Intel Rapid Recovery Technology.

Configuration options: [Disabled] [Enabled]

OROM UI and BANNER [Enabled]

[Disabled]

No OROM banner or information will be displayed if all disks and

RAID volumes are Normal.

[Enabled]

OROM UI is shown.

HDD Unlock [Enabled]

Selecting

[Enabled]

will indicate that the HDD password unlock in the OS is enabled.

Configuration options: [Disabled] [Enabled]

LED Locate [Enabled]

Selecting

[Enabled]

will indicate that the LED/SGPIO hardware is attached and ping to

locate feature is enabled on the OS.

Configuration options: [Disabled] [Enabled]

IRRT Only on eSATA [Enabled]

[Disabled]

Any RAID volume can span internal and eSATA drives.

[Enabled]

Only IRRT volumes can span internal and eSATA drives.

Summary of Contents for TS100-E9-PI4













































































































































Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands

Asus TS100-E9-PI4, User Manual

Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands