Asus TS100-E9-PI4 User Manual Download Page 51

Page: 51 / 140

ASUS TS100-E9-PI4

3-9

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

CPU, front, and rear fan connectors (4-pin FRNT_FAN1-4, REAR_FAN1, CPU_
FAN1)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors

on the motherboard, ensuring that the black wire of each cable matches the ground pin

of the connector.

Serial General Purpose Input/Output connector (6-1 pin SGPIO1)

The SGPIO 1 connector is used for the Intel Rapid Storage Technology Enterprise

SGPIO interface that controls the LED pattern generation, device information, and

general purpose data.

Summary of Contents for TS100-E9-PI4













































































































































Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands

Asus TS100-E9-PI4, User Manual

Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands