Asus TS100-E9-PI4 User Manual Download Page 108

Page: 108 / 140

5-6

Chapter 5: RAID Configuration

Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0,

10 and 5 only) then press <Enter>. The available stripe size values range from 4 KB to

128 KB. The following are typical values:

RAID 0:

128KB

RAID 10:

64KB

RAID 5:

64KB

We recommend a lower stripe size for server systems, and a higher stripe size for

multimedia computer systems used mainly for audio and video editing.

In the

Capacity

field item, key in the RAID volume capacity that you want to use and

press <Enter>. The default value field indicates the maximum allowed capacity.

Press <Enter> to start creating the RAID volume.

9. From the following warning message, press <Y> to create the RAID volume and return

to the main menu, or press <N> to go back to the

CREATE VOLUME

menu.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

Summary of Contents for TS100-E9-PI4













































































































































Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands

Asus TS100-E9-PI4, User Manual

Search results

Summary of Contents for TS100-E9-PI4

Reviews:

Related manuals for TS100-E9-PI4

Brands by name

Popular brands