Asus RT-AC5300 User Manual Download Page 98

Page: 98 / 142

Steering Trigger Condition

This set of controls sets the criteria to initiate band steering.

• Bandwidth Utilization

When bandwidth use exceeds this percentage, steering will

be initiated. Broadcom's documentation does not say how

utilization is measured.

• Enable Load Balance

This controls load balancing. Broadcom's documentation does

not indicate how balancing is done.

• RSSI

If the received signal level of any associated client meets this

criteria, steering will be triggered.

• PHY Rate Less / PHY Rate Greater

These controls determine STA link rates that trigger band

steering.

• VHT

This controls determines how 802.11ac and non-ac clients are

handled.

•

ALL

(default) means any type of client can trigger steering.

•

AC only

means a client must support 802.11ac to trigger

steering.

•

Not-allowed

means only non-802.11ac clients will trigger

steering, i.e. 802.11a/b/g/n.

Summary of Contents for RT-AC5300















































































































































Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands

Asus RT-AC5300, User Manual

Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands