Asus RT-AC5300 User Manual Download Page 91

Page: 91 / 142

•

Allow only specified IP address

: Click

Yes

if you want to

specify the IP addresses of devices that are allowed access to

the wireless router GUI settings from WAN.

•

Client List

: Enter the WAN IP addresses of networking

devices allowed to access the wireless router settings. This

list will be used if you clicked

Yes

in the

Only allow specific

item.

3. Click

Apply

4.7.3 Firmware Upgrade

NOTE

: Download the latest firmware from the ASUS website at

http://www.asus.com

To upgrade the firmware:

1. From the navigation panel, go to

Advanced Settings

Administration

Firmware Upgrade

tab.

2. In the

New Firmware File

field, click

Browse

to locate the

downloaded file.

3. Click

Upload

NOTES

• When the upgrade process is complete, wait for some time for the

system to reboot.

• If the upgrade process fails, the wireless router automatically enters

rescue mode and the power LED indicator on the front panel starts

flashing slowly. To recover or restore the system, refer to section

5.2

Firmware Restoration

Summary of Contents for RT-AC5300















































































































































Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands

Asus RT-AC5300, User Manual

Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands