Asus RT-AC5300 User Manual Download Page 101

Page: 101 / 142

101

5.2 Firmware Restoration

Firmware Restoration is used on an ASUS Wireless Router that
failed during its firmware upgrading process. It uploads the
firmware that you specify. The process takes about three to four
minutes.

IMPORTANT:

Launch the rescue mode on the router before using the

Firmware Restoration utility.

NOTE:

This feature is not supported on MAC OS.

To launch the rescue mode and use the Firmware Restoration
utility:

1. Unplug the wireless router from the power source.
2. Hold the Reset button at the rear panel and simultaneously

replug the wireless router into the power source. Release the

Reset button when the Power LED at the front panel flashes

slowly, which indicates that the wireless router is in the rescue

mode.

Summary of Contents for RT-AC5300















































































































































Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands

Asus RT-AC5300, User Manual

Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands