Asus RT-AC5300 User Manual Download Page 45

Page: 45 / 142

To launch the Media Server setting page, go to

General

USB

application

Media Services and

Servers

Media Servers

tab.

Refer to the following for the descriptions of the fields:

•

Enable iTunes Server?

: Select ON/OFF to enable/disable the

iTunes Server.

•

Enable DLNA Media Server

: Select ON/OFF to enable/

disable the DLNA Media Server.

•

Media Server Status

: Displays the status of the media server.

•

Media Server Path Setting

: Select

All Disks Shared

Manual Media Server Path

Using Network Place (Samba) Share service

Network Place (Samba) Share allows you to set up the accounts
and permissions for the Samba service.

To use Samba share:

1. From the navigation panel, go to

General

USB application

Media Services and

Servers

Network Place (Samba)

Share / Cloud Disk

tab.

NOTE

: Network Place (Samba) Share is enabled by default.

Summary of Contents for RT-AC5300















































































































































Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands

Asus RT-AC5300, User Manual

Search results

Summary of Contents for RT-AC5300

Reviews:

Related manuals for RT-AC5300

Brands by name

Popular brands