Asus RT-AC1200G+ User Manual Download Page 94

Page: 94 / 118

• If there is still no Internet access, try to reboot your computer

and verify the network’s IP address and gateway address.

• Check the status indicators on the ADSL modem and the

wireless router. If the WAN LED on the wireless router is not ON,

check if all cables are plugged properly.

You forgot the SSID (network name) or network password

• Setup a new SSID and encryption key via a wired connection

(Ethernet cable). Launch the web GUI, go to

Network Map

click the router icon, enter a new SSID and encryption key, and

then click

Apply

• Reset your router to the default settings. Launch the web GUI,

go to

Administration

Restore/Save/Upload Setting

, and

click

Restore

. The default login account and password are both

“admin”.

How to restore the system to its default settings?

• Go to Administration

Restore/Save/Upload Setting

, and

click

Restore

The following are the factory default settings:

User Name:

admin

Password:

admin

Enable DHCP:

Yes (if WAN cable is plugged in)

IP address:

router.asus.com

Domain Name:

(Blank)

Subnet Mask:

255.255.255.0

DNS Server 1:

192.168.1.1

DNS Server 2:

(Blank)

SSID (2.4GHz):

Refer to the label at the bottom of the

router

SSID (5GHz):

Refer to the label at the bottom of the

router

Summary of Contents for RT-AC1200G+























































































































Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands

Asus RT-AC1200G+, User Manual

Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands