Asus RT-AC1200G+ Page 104 User Manual Download

Page: 104 / 118

104

GNU General Public License

Licensing information

This product includes copyrighted third-party software licensed

under the terms of the GNU General Public License. Please see The

GNU General Public License for the exact terms and conditions of

this license. All future firmware updates will also be accompanied

with their respective source code. Please visit our web site for

updated information. Note that we do not offer direct support for

the distribution.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies of

this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your

freedom to share and change it. By contrast, the GNU General

Public License is intended to guarantee your freedom to share

and change free software--to make sure the software is free for all

its users. This General Public License applies to most of the Free

Software Foundation’s software and to any other program whose

authors commit to using it. (Some other Free Software Foundation

software is covered by the GNU Library General Public License

instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not

price. Our General Public Licenses are designed to make sure that

Summary of Contents for RT-AC1200G+























































































































Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands

Asus RT-AC1200G+, User Manual

Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands