Asus RT-AC1200G+ Page 100 User Manual Download

Page: 100 / 118

100

Appendices

Notices

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our

commitment to the highest standards for protecting our

environment. We believe in providing solutions for you to be able

to responsibly recycle our products, batteries, other components,

as well as the packaging materials. Please go to http://csr.asus.

com/english/Takeback.htm for the detailed recycling information

in different regions.

REACH

Complying with the REACH (Registration, Evaluation,

Authorisation, and Restriction of Chemicals) regulatory

framework, we published the chemical substances in our products

at ASUS REACH website at

http://csr.asus.com/english/index.aspx

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

Summary of Contents for RT-AC1200G+























































































































Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands

Asus RT-AC1200G+, User Manual

Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands