Asus RT-AC1200G+ User Manual Download Page 40

Page: 40 / 118

3.5.3 3G/4G

3G/4G USB modems can be connected to RT- to allow

Internet access.

NOTE:

For a list of verified USB modems, please visit:

http://event.asus.com/2009/networks/3gsupport/

To set up 3G/4G internet access:

1. From the navigation panel, click

General

USB application

3G/4G

2. In the

Enable USB Modem

field, select

Yes

3. Set up the following:

• Location:

Select your 3G/4G service provider’s location from

the dropdown list.

• ISP

: Select your Internet Service Provider (ISP) from the

dropdown list.

• APN (Access Point Name) service (optional)

: Contact your

3G/4G service provider for detailed information.

• Dial Number and PIN code

: The 3G/4G provider’s access

number and PIN code for connection.

Summary of Contents for RT-AC1200G+























































































































Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands

Asus RT-AC1200G+, User Manual

Search results

Summary of Contents for RT-AC1200G+

Reviews:

Related manuals for RT-AC1200G+

Brands by name

Popular brands