manualshive.com logo in svg

Asus RS720QA-E6/RS12, User Manual

Share
Download
Asus RS720QA-E6/RS12 User Manual Download Page 62

4-14

Chapter 4: Motherboard information

9.  Proprietary power connectors 

(20-pin PWR1, 20-pin PWR2, 4-pin EZ_PLUG1)

These connectors are for Proprietary power supply plugs. The power supply 

plugs are designed to fit these connectors in only one orientation. Orient the 

connectors and push down firmly until they completely fit.
The 4-pin EZ_PLUG is designed for hard disk drives power supply. DO NOT 

connect other 4-pin power connectors of the power supply unit (PSU) to this 

connector. 

•  Connect either one of the 20-pin power connectors to boot up the system.
•  Use of a PSU with a higher power output is recommended when configuring 

a system with more power-consuming devices. The system may become 

unstable or may not boot up if the power is inadequate.

•  USE THE PROPRIETARY POWER SUPPLY ONLY; otherwise you may 

damage the motherboard. Ensure that your PSU can provide at least the 

minimum power required by your system.

Summary of Contents for RS720QA-E6/RS12























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands