Asus RS720QA-E6/RS12 User Manual Download Page 126

Page: 126 / 150

7-8

Chapter 7: Driver installation

Red Hat

Enterprise Linux OS 5.0

To install the RAID controller driver when installing Red Hat

Red Hat

Enterprise OS:

1. Boot the system from the Red Hat

OS installation CD.

2. At the

boot:

, type

linux dd

3. Press <Enter>.

- To install or upgrade in graphical mode, press the <ENTER> key.

- To install or upgrade in text mode, type: linux text <ENTER>.

- Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

4. Select

Yes

using the <Tab> key when asked if you have the driver disk, then

press <Enter>.

Main Menu

Do you have a driver disk?

Yes

5. Insert the Red Hat

Enterprise RAID driver disk to the USB floppy disk drive,

select

, then press <Enter>.

The drivers for the RAID card are installed to the system.

Insert Driver Disk

Insert your driver disk into /dev/fd0 and

press “OK” to continue.

Back

Summary of Contents for RS720QA-E6/RS12























































































































































Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands

Asus RS720QA-E6/RS12, User Manual

Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands