Asus RS720QA-E6/RS12 User Manual Download Page 17

Page: 17 / 150

ASUS RS720QA-E6/RS12, RS724QA-E6/RS12

1-7

1.6

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy

disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. Redundant power supply and power fan

2. ASUS KGNH-D16 Server Boards (RS720QA-E6/RS12); KGMH-D16/QDR

Server Boards (RS724QA-E6/RS12)

3. System fans

4. SATA/SAS backplane (hidden)

5. Hot-swap HDD trays (SAS and SATA)

6. Front LED Boards

Turn off the system power and detach the power supply before removing or

replacing any system component.

Summary of Contents for RS720QA-E6/RS12























































































































































Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands

Asus RS720QA-E6/RS12, User Manual

Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands