manualshive.com logo in svg

Asus RS700A-E9 V2 Series, User Manual, Page: 64 / 192

Share
Download
Asus RS700A-E9 V2 Series User Manual Download Page 64

Chapter 2: Hardware Information

2-36

2.8 

Storage device configuration and cabling  

 

(for RS700A-E9-RS12V2 only)

This section illustrates some storage configurations that is recommended with your server 

system. Before you start installing or removing the storage device cables, ensure that you 

have installed the correct storage devices into the supported bays.

Refer to section 

2.4 Storage Devices

 for details on how to install storage devices.

• 

Bay 1 to bay 4 supports SATA by default. SAS support requires optional ASUS PIKE II 

card.

• 

Bay 5 to bay 8 supports SATA by default. SAS support requires optional ASUS PIKE II 

card. NVMe support requires optional upgrade kit.

• 

Bay 9 to bay 12 supports SATA with optional cables. NVMe support requires optional 

upgrade kit.

• 

All bays support 2.5” drives with trays.

1

2

Bay 1

Bay 3

Bay 5

Bay 7

Bay 9

Bay 11

Bay 2

Bay 4

Bay 6

Bay 10

Bay 8

Bay 12

Summary of Contents for RS700A-E9 V2 Series

































































































































































































Reviews:

No comments