Asus RS700A-E9 V2 Series, User Manual, Page: 49 / 192

2-21 ASUS RS700A-E9 Series V2
RS700A-E9-RS12V2
5. Install the ASUS PIKE II card and the metal cover assembly to the butterfly riser card
bracket. Ensure that the metal cover is inserted and firmly seated in place.
Refer to section
2.5.2 Installing an expansion card to the butterfly riser card bracket
for the steps on installing an expansion card to the butterfly riser card bracket.
1. Prepare the ASUS PIKE II card.
2. Remove the two screws on the ASUS
PIKE II card (A), then remove the card
bracket (B).
If your expansion card is pre-installed
with a proprietary card bracket,
proceed to step 4.
Metal cover
Card bracket
3. Secure the ASUS PIKE II card and the
metal cover (proprietary card bracket)
with the two screws.
4. Connect the mini-SAS HD cables to the
ASUS PIKE II card.
6. Connect the mini-SAS HD cables to the backplane.
Refer to section 2.8 Storage device configuration and cabling (for RS700A-E9-RS12V2
only)
for details on the storage device cabling.