Asus RS700A-E9 V2 Series User Manual Download Page 142

Page: 142 / 192

5-20

Chapter 5: BIOS Setup

INT19 Trap Response [Immediate]

[Immediate]

Execute the trap right away.

[Postponed]

Execute the trap during legacy boot.

HDD Connection Order [Adjust]

This option allows you to select the HDD Connection Order. Some OS require HDD

handles to be adjusted.

Configuration options: [Adjust] [Keep]

Boot Option filter [UEFI and Legacy]

This option allows you to control the Legacy/UEFI ROMs priority.

Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only]

Network / Storage / Video [Legacy]

This option allows you to control the execution of UEFI and Legacy PXE / Storage /

Video OpROM.

Configuration options: [UEFI] [Legacy]

Other PCI devices [Legacy]

This item determines the OpROM execution policy for devices other than Network,

Storage, or Video.

Configuration options: [UEFI] [Legacy]

5.4.10 NVMe Configuration

This page will display the NVMe controller and drive information.

Summary of Contents for RS700A-E9 V2 Series

































































































































































































Search results

Summary of Contents for RS700A-E9 V2 Series

Reviews:

Asus RS700A-E9 V2 Series, User Manual, Page: 142 / 192

Search results

Summary of Contents for RS700A-E9 V2 Series

Reviews: