Asus RS700A-E9 V2 Series, User Manual, Page: 158 / 192

5-36 Chapter 5: BIOS Setup
5.10.3 UMC Common Option
DDR4 Common Options
DRAM Timing Configuration
This item allows you to enable DRAM timing configuration.
Damage caused by use of your AMD processor outside of specification or in excess of
factory settings are not covered by your system manufacturers warranty.
DRAM Controller Configuration
DRAM Power Options
Power Down Enable [Auto]
This item allows you to enable or disable power down mode.
Configuration options: [Disabled] [Enabled] [Auto]
Cmd2T [Auto]
Configuration options: [Auto] [1T] [2T]
Gear Down Mode [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
CAD Bus Configuration
CAD Bus Timing User Controls [Auto]
This item allows you to set the CAD bus signals to Auto or Manual.
Configuration options: [Auto] [Manual]
The following items appear only when you set CAD Bus Timing User Controls to
[Manual]
.
AddrCmdSetup [0]
This item allows you to setup time on CAD bus signals.
Configuration options: [0] – [39]
CsOdtSetup [0]
This item allows you to setup time on CAD bus signals.
Configuration options: [0] – [39]
CkeSetup [0]
This item allows you to setup time on CAD bus signals.
Configuration options: [0] – [39]
CAD Bus Drive Strength User Controls [Auto]
This item allows you to set the CAD bus signals to Auto or Manual.
Configuration options: [Auto] [Manual]
The following items appear only when you set CAD Bus Drive Strength User Controls to
[Manual] .