Asus RS700A-E9 V2 Series, User Manual, Page: 47 / 192

2-19 ASUS RS700A-E9 Series V2
2.5.3 Installing an ASUS PIKE II card
You can install an additional ASUS PIKE II card to support SAS storage devices in your
server system.
5. Install the ASUS PIKE II card and the metal cover assembly to the riser card bracket or
butterfly riser card bracket. Ensure that the metal cover is inserted and firmly seated in
place.
Refer to section 2.5.1 Installing an expansion card to the riser card bracket or 2.5.2
Installing an expansion card to the butterfly riser card bracket
for the steps on
installing an expansion card to the riser card bracket or butterfly riser card bracket.
1. Prepare the ASUS PIKE II card.
2. Remove the two screws on the ASUS
PIKE II card (A), then remove the card
bracket (B).
If your expansion card is pre-installed
with a proprietary card bracket,
proceed to step 4.
Metal cover
Card bracket
3. Secure the ASUS PIKE II card and the
metal cover (proprietary card bracket)
with the two screws.
4. Connect the mini-SAS HD cable to the
ASUS PIKE II card.
RS700A-E9-RS4V2