Asus RS700A-E9 V2 Series, User Manual, Page: 38 / 192

Chapter 2: Hardware Information 2-10
2.4 Storage devices
RS700A-E9-RS4V2
The system supports four (4) 3.5” hot-swap SATA/SAS storage devices. The storage device
installed on the storage device tray connects to the motherboard SATA/SAS ports via the
SATA/SAS backplane (SAS support requires optional ASUS PIKE II card.).
To install a 3.5” hot-swap SATA/SAS storage device:
1. Push the spring lock to the right (A) then pull the tray lever outward (B) to release the
storage device tray. The storage device tray ejects slightly after you pull out the lever.
2. Firmly hold the tray lever and pull the
storage device tray out of the bay.
3. Place the storage device tray on a
flat and stable surface.
4. Prepare the SATA/SAS storage
device and the bundled set of
screws.
Spring lock
Tray lever