Asus RS700A-E9 V2 Series, User Manual, Page: 161 / 192

5-39 ASUS RS700A-E9 Series V2
Address Hash RM [Auto]
This item allows you to enable or disable RM address hashing.
Configuration options: [Enabled] [Disabled] [Auto]
SPD Read Optimization [Auto]
This item allows you to enable or disable SPD Read Optimization, if set to
[Enabled]
,
SPD reads are skipped for Reserved fields and most of upper 256 Bytes. If set to
[Disabled] , read all 512 SPD Bytes.
Configuration options: [Enabled] [Disabled] [Auto]
Memory MBIST
MBIST Enable [Disabled]
This item allows you to enable or disable Memory MBIST.
Configuration options: [Enabled] [Disabled]
The following items appear only when MBIST Enable is set to [Enabled] .
MBIST Test Mode [Auto]
This item allows you to select the MBIST Test Mode - Interface Mode (Tests Single
and Multiple CS transactions and Basic Connectivity) or Data Eye Mode (Measures
Voltage vs. Timing).
Configuration options: [Interface Mode] [Data Eye Mode] [Both] [Auto]
MBIST Aggressors [Auto]
This item allows you to enable or disable Memory Aggressor test.
Configuration options: [Enabled] [Disabled] [Auto]
MBIST Per Bit Slave Die Reporting [Auto]
Reports 2D Data Eye Results in ABL Log for each DQ, Chipselect, and Channel.
Configuration options: [Enabled] [Disabled] [Auto]
Data Eye
Pattern Select [PRBS]
Configuration options: [PRBS] [SS0] [Both]
Pattern Length [3]
This token helps to determine the pattern length. The possible options are
N=3...12.
Configuration options: [3] – [9]
Aggressor Channel [1 Aggressor Channel]
This helps read the aggressors channels. If set to [Enabled] , you can
read from one or more than one aggressor channel. The default is set to
[Disabled] .
Configuration options: [Disabled] [1 Aggressor Channel] [3 Aggressor
Channels] [7 Aggressor Channels]
Aggressor Static Lane Control [Disabled]
Configuration options: [Disabled] [Enabled]
The following items appear only when
Aggressor Static Lane Control
is set to
[Enabled]
.