Asus RS520-E8-RS12-EV2 User Manual Download Page 32

Page: 32 / 206

Chapter 2: Hardware Information

2-8

•

Ensure that the Thermal Interface

Material is spread in an even thin

layer.

•

Some heatsinks come with
pre-applied Thermal Interface

Material. If so, skip this step.

13. Apply some Thermal Interface Material

to the exposed area of the CPU that the
heatsink will be in contact with.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes

or touches your skin, wash it off immediately, and seek professional medical help.

14.

Install the heatsink according to the illustrations below.

15. Recover the air duct when the CPU and DIMMs are installed.

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Related manuals for RS520-E8-RS12-EV2

Brands by name

Popular brands

Asus RS520-E8-RS12-EV2, User Manual

Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Related manuals for RS520-E8-RS12-EV2

Brands by name

Popular brands