Asus RS520-E8-RS12-EV2 User Manual Download Page 197

Page: 197 / 206

7-23

ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2

7.6

VGA driver installation

This section provides the instructions on how to install the ASPEED Video Graphics Adapter
(VGA) driver.

You need to manually install the ASPEED VGA driver on a Windows

operating system.

To install the ASPEED VGA driver:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD
automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click the

ASPEED AST2300 / AST2400 Display Driver

to begin installation.

From the installation window, click

Next

to start the installation.

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Brands by name

Popular brands

Asus RS520-E8-RS12-EV2, User Manual

Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Brands by name

Popular brands