manualshive.com logo in svg

Asus RS520-E8-RS12-EV2, User Manual

Share
Download
Asus RS520-E8-RS12-EV2 User Manual Download Page 171

6-35

ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2

6.4.2 

Changing a Volume Type

To change the volume type in 

Volume Properties

:

1. 

Click the SATA array items you want to change in 

Volumes

 field.

2 

From the 

Volume Properties

 field, select 

Type:RAID 1 Change type

.

We recommend a lower stripe size for server systems, and a higher stripe size for 

multimedia computer systems used mainly for audio and video editing.

3. 

You can change the 

Name

, 

Select the new volume type

, and 

Select additional 

disks to include in the new volume

 if needed.

4. 

Select the 

Data stripe size

 for the RAID array (for RAID 0, 10 and 5 only), and click 

OK

. The available stripe size values range from 4 KB to 128 KB. The following are 

typical values:

 

RAID 0: 128KB

 

RAID 10: 64KB

 

RAID 5: 64KB

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands