Asus RS520-E8-RS12-EV2 User Manual Download Page 80

Page: 80 / 206

Chapter 4: Motherboard Information

4-20

Memory error LED (MEMERRA1, MEMERRA2, MEMERRB1, MEMERRB2,

MEMERRC1,

MEMERRC2, MEMERRD1, MEMERRD2, MEMERRE1, MEMERRE2,

EMERRF1,

MEMERRF2, MEMERRG1, MEMERRG2, MEMERRH1, MEMERRH2)

The DIMM warning LEDs light up to indicate failure on the corresponding DIMMs.

The warning LEDs only functions when you enable the ASUS ASMB8.

CATT LED (CATTERR_LED1)

The CATT LED indicates that the system has experienced a fatal or catastrophic error
and cannot continue to operate.

CATT LED (CATTERR_LED1)

The CATT LED indicates that the system has experienced a fatal or catastrophic error
and cannot continue to operate.

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Brands by name

Popular brands

Asus RS520-E8-RS12-EV2, User Manual

Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Brands by name

Popular brands