Asus RS500-E8-PS4 User Manual Download Page 62

Page: 62 / 194

Chapter 4: Motherboard information

4-14

11. Auxiliary panel connector (20-2 pin AUX_PANEL1)

This connector is for additional front panel features including front panel SMB, locator

LED and switch, chassis intrusion, and LAN LEDs.

1. Front panel SMB (10-2 pin FPSMB)

These connectors are for the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1_LINKACTLED, LAN2_LINKACTLED)

These connectors are for Gigabit LAN activity LEDs on the front panel.

3. Locator LED (2-pin LOCATORLED1, LOCATORLED2)

These connectors are for the locator LED1 and LED2 on the front panel. Connect

the Locator LED cables to these 2-pin connector. The LEDs will light up when the

Locator button is pressed.

4. Locator Button/Switch (2-pin LOCATORBTN#)

These connectors are for the locator button on the front panel. This button queries

the state of the system locator.

Summary of Contents for RS500-E8-PS4



































































































































































































Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands

Asus RS500-E8-PS4, User Manual

Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands