Asus RS500-E8-PS4 User Manual Download Page 47

Page: 47 / 194

3-3

ASUS RS500-E8 Series

2. Select a desired space and place the appropriate rack rail (left and right) on

opposite positions on the rack.

A 1U space is consists of three square mounting holes with two thin lips on the top and the

bottom.

Press the spring lock then insert the studs into the selected square mounting holes on

the rack post.

4. Press the spring lock on the other end of rail then insert the stud into the mounting hole

on the rack post. Extend the rack rail, if necessary.

5. (Optional) Use the rail screw and rail washer that comes with the kit to secure the rack

rail to the rack post.

6. Perform steps 3 to 5 for the other rack rail.

Ensure that the installed rack rails (left and right) are aligned, secured, and stable in place.

Summary of Contents for RS500-E8-PS4



































































































































































































Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands

Asus RS500-E8-PS4, User Manual

Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands