Asus RS500-E8-PS4 User Manual Download Page 180

Page: 180 / 194

7-18

Chapter 6: Driver installation

7.4 Intel

chipset device software installation

This section provides the instructions on how to install the Intel

chipset device software on

the system.

You need to manually install the Intel

chipset device software on a Windows operating

system.
To install the Intel

chipset device software:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click the item

Intel Chipset Device Software

from the menu.

4. The

Intel(R) Chipset Device Software

window appears. Click

Next

to start

installation.

Summary of Contents for RS500-E8-PS4



































































































































































































Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands

Asus RS500-E8-PS4, User Manual

Search results

Summary of Contents for RS500-E8-PS4

Reviews:

Related manuals for RS500-E8-PS4

Brands by name

Popular brands