Asus RS100-E10-PI2 User Manual Download Page 16

Page: 16 / 166

Chapter 1: Product Introduction

1-6

1.6

Internal features

The barebone server includes the basic components as shown.

WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

PCI-E Gen3 x16 Slot with Riser Card (at x8 link)

System Fan

ASUS P11C-M/4L Server board

Power Supply

Slim-type Optical Drive (Optional)

HDD Bay 2

HDD Bay 1 (partly hidden)

Turn off the system power and detach the power supply before removing or replacing any

system component.

This barebone server does not include a floppy disk drive. Connect a USB floppy disk drive

to any of the USB ports on the front or rear panel if you need to use a floppy disk.

Summary of Contents for RS100-E10-PI2







































































































































































Search results

Summary of Contents for RS100-E10-PI2

Reviews:

Related manuals for RS100-E10-PI2

Brands by name

Popular brands

Asus RS100-E10-PI2, User Manual

Search results

Summary of Contents for RS100-E10-PI2

Reviews:

Related manuals for RS100-E10-PI2

Brands by name

Popular brands