Asus RS100-E10-PI2 User Manual Download Page 143

Page: 143 / 166

ASUS RS100-E10-PI2

6-11

6.2.6

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

Rapid Storage Technology enterprise SATA Option ROM utility.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

Go to the

Boot

menu and select the boot option priority.

Use up/down arrow keys to select the boot priority and press <Enter>. See the

Boot

menu

section of Chapter 5 for more details.

From the

Exit

menu, select

Save Changes & Exit

, then press <Enter>.

When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for RS100-E10-PI2







































































































































































Search results

Summary of Contents for RS100-E10-PI2

Reviews:

Related manuals for RS100-E10-PI2

Brands by name

Popular brands

Asus RS100-E10-PI2, User Manual

Search results

Summary of Contents for RS100-E10-PI2

Reviews:

Related manuals for RS100-E10-PI2

Brands by name

Popular brands