Asus RS100-E10-PI2, User Manual

Page: 44 / 166

Chapter 2: Hardware Information 2-26
2. Remove the screw to release the
expansion card bracket from the
chassis.
To install the expansion card:
1. Hold the riser card and pull it upwards
to detach it from the PCI Express slot
on the motherboard.
3. Remove the screw from the metal
cover (A) and remove the metal cover
(B) from the bracket.
2.5 Expansion card
This system comes with a riser card. You need to remove the riser card and the expansion
slot bracket if you want to install an expansion card.
Unplug the power cord before installing or removing an expansion card. Failure to do so
may cause severe damage to the motherboard and other system components!
2.5.1 Installing an expansion card