Asus Rampage IV Extreme User Manual Download Page 58

Page: 58 / 179

2-34

Chapter 2: Hardware information

Chapter 2

USB 3.0 connector (20-1 pin USB3_56, USB3_78)

This connector is for the additional USB 3.0 ports, and complies with the USB 3.0

specificaton that supports up to 4.8Gbps connection speed. If the USB 3.0 front panel

cable is available from your system chassis, with this USB 3.0 connector, you can have

a front panel USB 3.0 solution.

The USB 3.0 module is purchased separately.

Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)

These connectors are for temperature monitoring. Connect the thermal sensor cables

to these connectors and place the other ends to the devices which you want to monitor

temperature. The optional fan1/2/3 can work with the temperature sensors for a better

cooling effect.

Enable

OPT FAN1/2/3 overheat protection

in BIOS if you connect thermal sensor cables

to these connectors.

Thermal sensor cables are purchased separately.

Summary of Contents for Rampage IV Extreme




















































































































































































Search results

Summary of Contents for Rampage IV Extreme

Reviews:

Related manuals for Rampage IV Extreme

Brands by name

Popular brands

Asus Rampage IV Extreme, User Manual

Search results

Summary of Contents for Rampage IV Extreme

Reviews:

Related manuals for Rampage IV Extreme

Brands by name

Popular brands