Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 35

Page: 35 / 158

2-17

ASUS TS100-E4/PI2

2.6.2 Installing additional optical drive(s)

1. Select the drive bay you intend

to use. Push the knock down

metal cover in and out of the

chassis until it is removed.

2. Carefully insert the drive to the

bay, then push it inward until it

is flushed to the chassis front

panel.

3. Align the optical drive and bay

screw holes.

4. Secure the drive with two screws

on both sides of the bay.

Screw holes

Configure your optical drive as Master/Slave device before installing it to

the drive bay. Refer to the optical drive documentation for details.

To install an additional optical drive(s):

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands