Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 53

Page: 53 / 158

ASUS TS100-E4/PI2

3-11

3.3.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)

This connector is for the provided Floppy Disk Drive (FDD) signal

cable. Insert one end of the cable to this connector, then connect the

other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection

when using a FDD cable with a covered Pin 5.

P5M2-M/C_TS100-E

P5M2-M/C_TS100-E4 Floppy Disk Drive Connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

FLOPPY1

PIN 1

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands