Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 140

Page: 140 / 158

6-6

Chapter 6: Driver installation

5.  Right-click the RAID controller item, then select Properties.
6.  Click the Driver tab, then click the Update Driver button.
7.  The

Upgrade Device Driver Wizard

window appears. Click Next.

8. Insert the RAID driver disk you created earlier to the floppy disk drive.

9. Select the option “Search for a suitable driver for my device (recom-

mended)”, then click Next.

10. The wizard searches the RAID

controller drivers. When found,

click Next to install the drivers.

11. Click Finish after the driver

installation is done.

To an existing Windows

2003 Server OS

To install the RAID controller driver on an existing Windows

2003

Server OS:

1. Restart the computer, then log in with Administrator privileges.
2. Windows

automatically detects the RAID controller and displays a New

Hardware Found window. Click Cancel.

3. Right-click the My Computer icon on the Windows

desktop , then

select Properties from the menu.

4. Click the Hardware tab then click the Device Manager button to display

the list of devices installed in the system.

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands