Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 137

Page: 137 / 158

ASUS TS100-E4/PI2

6-3

6.1.2 Installing the RAID controller driver

Windows

2003 Server OS

During Windows

2003 Server OS installation

To install the RAID controller driver when installing Windows

2000/2003

Server OS:

1. Boot the computer using the Windows

2003 Server installation CD.

The Windows

2003 Setup starts.

2. Press <F6> when the message “Press F6 if you need to install a third

party SCSI or RAID driver...” appears at the bottom of the screen.

3. When prompted, press <S> to specify an additional device.

For systems with Red Hat

Enterprise versions that are not listed in the

Makedisk menu, explore the support CD and copy the RAID driver disk

from the following path: \ICH7R LSI RAID\Driver\Linux.

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Brands by name

Popular brands